Family Owned & Operated 25+ Years

 

 
 

     

  1. Using your existing pool pump, pool water is directed through a series of valves to your solar collectors.
  2. Pool water enters the solar collectors at the bottom and rises to the top through the individual tubes of the collector.
  3. As the water rises through the collector it is heated by the sun's radiant energy.
  4. The swimming pool water is then returned to your pool to repeat the cycle until your pool is warm.

Individual Tubes:

Heliocol's one-of-a-kind individual tube design is one of the most significant reasons why Heliocol is the finest solar pool heating system on Earth. All other panels use a webbed tube design, meaning the tubes are connected together in a solid plate.

Individual tubes are better for several reasons:

Individual Tubes Create More Heat than Other Panels
Round tubes are the most efficient means of absorbing the sun's energy. Heliocol's patented individual tube design allows for maximum absorption of the sun's heat all day long unlike other panels, which are most efficient only at solar noon.

Individual Tubes Protect Your Roof and Prevent Roof Rot
Unlike webbed collectors, which trap debris and moisture, Heliocol panels allow your roof to breathe. Heliocol's individual tube design allows for proper evaporation of rain and even cools your home, reducing air conditioning bills in the summer time.

Individual Tubes Do Not Create Lift
Other solar panels use webbing between their tubes; this creates lift. To prevent their panels from flying away, our competitors must use straps to hold their panels in place. Straps mean more holes in your roof and greater potential for leaks. Heliocol solar panels create no lift and require no straps!

Plastic Panel Clamp:

Other manufacturers use rubber hoses and metal clamps to connect their panels together. The people of Heliocol have created the world's only patented panel connector, the Plastic Panel Clamp. Rubber hoses require maintenance every six months and are prone to leaks. Metal clamps rust and stain the roof. Heliocol's Plastic Panel Clamps never need maintenance, never rust and are guaranteed to never leak!

Over-molded Header:

Every solar industry professional knows tubing connection is of crucial importance to prevent leakage over time. Heliocol's patented over-molded header insures the strongest possible connection between tubing because the header is actually formed around the tubes. This process actually joins the tubes and header together as one solid piece. Other panels use smoldered connections or sub-plenum's requiring that small holes be drilled in the header. This less sophisticated method restricts flow and causes the pool pump to work harder. The Heliocol panel creates virtually no back pressure because every tube has its own opening in the header. Some systems require tube to header connections on-site and are prone to frequent leaking. However, every Heliocol panel is pressure tested before it leaves the factory to ensure it is perfect. This is why Heliocol is the only product of its kind to meet "zero-defect" ISO 9002 specifications and standards.

Testimonials

"Thanks so much for the great Service & Support, it's no wonder why you are A+ rated BBB" 

Vanessa & Todd Macerone

Family Owned & Operated

Not Just another ONLINE Retailer!

Online Reiews

Hear what customers are saying about the Florida Pool Heating.

 
 
 
Corporate Office: 10790 Wiles Road Coral Springs FL 33065 - Fax 954.341.2004 - Toll Free 800.780.4328
 
 
Copyright Florida Pool Heating; . All rights reserved.
This website was built by Ewisoft Website Builder.